Characteristics And Use Environment Of Fluorine-lined Ball Valve

Introduction:

Lined Ball Valve a valve driven by a valve stem and rotating around the axis of the ball valve.

Features:

1. Wear-resistant; Since the valve core of the hard-sealed ball valve is alloy steel spray-welded and the sealing ring is alloy steel surfacing, the hard-sealed ball valve will not produce too much wear when switching. (Its hardness coefficient is 65-70);

2. Good sealing performance; Since the seal of the hard-sealed ball valve is manually ground, it can only be used until the valve core and the sealing ring are completely matched. So its sealing performance is reliable;

3. Light switch; Since the bottom of the sealing ring of the hard-sealed ball valve uses a spring to hold the sealing ring and the valve core tightly together, the switch is very light when the external force exceeds the preload of the spring;

4. Long service life: It has been widely used in various departments such as petroleum, chemical industry, power generation, papermaking, atomic energy, aviation, rockets, and people's daily life.

Use environment:

1. Indoor installation or outdoor application with protection;

2. Outdoor installation, subject to erosion by wind, sand, rain, dew, sunlight, etc.;

3. Environment with flammable and explosive gas or dust;

4. Environment in humid tropical and dry tropical areas;

5. Pipeline medium temperature is as high as 450℃ or above;

6. Ambient temperature is below -20℃;

7. Prone to flooding or immersion in water;

8. Environment with radioactive materials (nuclear power plants and radioactive material test devices);

9. Environment on ships or docks (with salt spray, mold, humidity);

10. Occasions with severe vibration; Occasions prone to fire.